Usage
- 100mm Blades diameter
- Smooth sanding with Tungsten Carbide coating
- Detail & Sculpting Performance
- Power sanding on Large-sided (Outside)
- Special Nuts & Spanner included
Angle grinder is not included
Please check your "Spindle size" of angle grinder.
Specifications
- Max. Blade diameter: 100 mm
- Max. RPM: 15,000 rpm
- Power: 630 - 750 watt
- Disc Bore Size: M14
- Weight: 0.39kg (without angle grinder)
- Working width: 100 mm
Features
① 4" Sanding Disc
② Tungsten Carbide
- The whole blade is coated on Tungsten carbide
- Strong grinding effect
What's included
- Product Composition
- Tungsten Carbide Disc 4"
- Special Nuts
- Spanner
Manpa 4" Sanding Wheel
SKU: MANPA-MP21-17-4
$150.00Price
- Please read and follow all safety instructions carefully. Please keep the manual for future reference.
- When operating, always wear safety equipment such as face masks and safety goggles.
- Always secure the workpiece securely when working.
- Make sure that the grinder switch is off before plugging in the power cord.
- Be careful not to touch the cutter blade. Serious injury may result.
- Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
- When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
- After operation, turn off the switch and set it down when The remaining rotation stop completely.
- Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
- Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.